Archives

All posts by admin

One of my 3D printed 1/29 scale fellows on a CNC cut out Critter. Its a tiny locomotive I’ve designed based on a collage of prototypes from google searches. It’s cut out of sheet of 5mm finish ply and fits on a USA Trains 4 wheel power truck. I’ve left room for batteries and controls, I’m not a track power guy.

Warehouse Build

So this is the finished warehouse. Or I guess. It still needs some steps and other details but the main construction is done. I do hate that one support that is crooked. Hmm. Have to fix that. I need to light all of my structures and come up with a common power feed. It’s on the list.

Here are some pictures of my computer/manual switch throw. I was looking for a device that I could use to throw a switch both with a manual lever and also have a servo drive it for computer control. This is what I came up with. After a bit of testing, it seems like it will do just what I want. It uses a cheap waterproof servo, three magnets and a styrene throw. There are two magnets on the servo wheel and one on the throw. There is no connection between the servo wheel and the actuator other than the magnetic ‘clutch’. The ‘spring’ wire is a paper clip bent to fit. With the servo off or centered, you can throw the switch manually and it ‘clicks’ to one of the two magnets on the wheel. Under computer control, the servo can rotate to ‘pick up’ the magnet on the arm to throw the switch. Works quite well on the bench so I’ll be installing it soon to test out in Gilbert.

Finally got the basics together with a coat of primer. Some 1/29 People standing in front. Need some glass in the windows and an interior, some shingles on the roof and other details but the basic shell is coming off the router pretty well now. Still needs some tweaking to get a good solid production run but it’s coming together nicely.